Applications

Liquid-Liquid Separation

Oil-Water, Water-Oil and Other 2 Phase Separator Packages

‘Becophase’ Liquid-Liquid Coalescers
Coalescing technology and media are also used to separate immiscible liquids. These are typically emulsions or hazy mixtures, and by separating them it can reduce the volume [...]learn more »

Oil & Gas

Oil Refining › MEA Unit

PROCESS INFORMATION
The Amine gas treating, also known as gas sweetening, refers to a process that uses aqueous solutions of various alkylamines (commonly known as amines) to remove hydrogen sulphide (H2S) and carbon [...]learn more »

Oil & Gas

Oil Refining › Naptha Hydrotreater

PROCESS INFORMATION
The Naptha Hydrotreater prepares feedstock for downstream reforming or isomerization. The naphtha feed is mixed with hydrogen rich recycle gas. The mixed feed is then heated and then fed [...]learn more »

Oil & Gas

Oil Refining › Ethylene Plant

PROCESS INFORMATION
In an Ethylene plant there are multiple stages of compression, kinked with Knock Out Drums before and after the compressors (see below), and also Water Quench and Caustic [...]learn more »

Oil & Gas

Oil Refining › Produced Water Effluent Treatment

PROCESS INFORMATION
The produced water effluent from a refinery can be treated in multiple stages, using appropriate equipment for each stage.
Primary Separation with a Plate separator (CPI) to give [...]learn more »

Tail Gas Scrubbing

Tail Gas Scrubbing › Wet Scrubber Exits

PROCESS INFORMATION
Existing Wet Gas Scrubbers may have a filter stage at the top but it may not be giving the optimum efficiency, or may have problems of blockage.
Tail [...]learn more »

Tail Gas Scrubbing

Tail Gas Scrubbing › Wet Scrubbers

PROCESS INFORMATION
Chemical, process and other industrial atmospheric emission abatement requirements.
PROBLEMS TO SOLVE
a) Prevent noxious gas emissions
b) Prevent noxious or other solid particulate emissions
c) Prevent pollutant [...]learn more »

Steam Boiler

Demisting / Droplet Separation

PROCESS INFORMATION
The primary function of the boiler steam drum is separate water from steam which prevents carryover of the condensate into to the steam header (the separated steam is [...]learn more »

Metal Quenching

Metal Quenching › Fume Abatement

PROCESS INFORMATION

In the metals casting industry there is a need to cool the hot parts by quench cooling them in 180°C  oil baths. Inevitably this causes an oil [...]learn more »

Non-Ferrous Metals Processing

Non-Ferrous Metals › Aluminia

PROCESS INFORMATION
Aluminia is washed and filtered under vacuum.
‘Red mud’ needs to be separated and washed to increase solids content in deep cone thickener tanks.
DESIGN SOLUTION
New Hongda [...]learn more »