Titanium Dioxide

Filter › Chorine Process Mist Elimination

TITANIUM DIOXIDE / CHLORIDE PROCESS – HYDROCHLORIC ACID FILTRATION

PROCESS INFORMATION

Hydrochloric Acid can be emitted from many industrial processes, where it is either used in that form, or generated from the process.
HCl will usually be in fine, sub-micron mist form.

The gas comes from the process or vapours are drawn to the chimney by a suction fan.

In a Titanium Dioxide Chloride process there are emissions of TiO2 dust along with HCl, and after one or more gas scrubbing stages (see also section 18.2), fibre bed mist eliminators are installed to capture the HCl mist

PROBLEMS TO SOLVE

Air Pollution

DESIGN SOLUTIONS

File Name : DSCN1180.JPG File Size : 730.4KB (747881 Bytes) Date Taken : 2005/08/16 09:58:50 Image Size : 1600 x 1200 pixels Resolution : 300 x 300 dpi Bit Depth : 8 bits/channel Protection Attribute : Off Hide Attribute : Off Camera ID : N/A Camera : E775 Quality Mode : FINE Metering Mode : Matrix Exposure Mode : Programmed Auto Speed Light : No Focal Length : 5.8 mm Shutter Speed : 1/8.2 second Aperture : F2.8 Exposure Compensation : 0 EV White Balance : Auto Lens : Built-in Flash Sync Mode : N/A Exposure Difference : N/A Flexible Program : N/A Sensitivity : Auto Sharpening : Auto Image Type : Color Color Mode : N/A Hue Adjustment : N/A Saturation Control : N/A Tone Compensation : Normal Latitude(GPS) : N/A Longitude(GPS) : N/A Altitude(GPS) : N/A DSCN1027